Backup and Restore EWON Configuration using eBuddy PaniEnergy Support

Natitf Config On Ewon. Ewon Cosy 131 Manual Looking at the NAT document that you attached in this feed Ewon's web interface: changing NatItf setting on Cosy; On Flexy, navigate to Setup → System → Communication →.

Ewon Flexy Connectitude IIoT Platform™
Ewon Flexy Connectitude IIoT Platform™ from docs.connectitude.com

In a typical Ewon Cosy installation, all communication through the Cosy occurs within an The Ewon's NAT and TF settings affect how devices must be configured to be accessible through the Ewon's VPN connection

Ewon Flexy Connectitude IIoT Platform™

In this case, the parameter "Nat and TF" must be set on "NAT on WAN" (NatItf : 2) The Ewon's NAT and TF settings affect how devices must be configured to be accessible through the Ewon's VPN connection in S7-300/400 ethernet configuration set access via Router and Subnet mask to EWON ip address

Can't figure out Nat 11 eWON Cosy hms.how. For this just add the 3 fields inside the comcfg.txt file used here above Note: Please check with your IT department to discuss which IP addresses can be used and reserved for the NAT 1:1 feature of the Ewon.

Description of the Ewon system parameters you can find in config.txt. Looking at the NAT document that you attached in this feed parameters in the eWON A: WANPermCnx:1 FwrdToWAN:1 NatItf:2 - Note - With the example we gave, you would need to change these parameters in eWON A: EthIP:172.31.254.1 EthMask:255.255.255.252